High quality reverse osmosis filter for the purification of tap water. The filter guarantees clean, soft water, free from nitrates and nitrites, chlorine and many other impurities.
The set includes all the elements needed to install the filter. Just remove the filter from the packaging and connect according to the instructions, the entire assembly is extremely simple and takes about 15 minutes.
Using the filter, it is possible to remove organic and inorganic substances dissolved in tap water with an efficiency of 95-98%. The purification takes place without the addition of any chemical reagents.
The filter prevents pesticide residues and other toxic substances from entering the aquarium together with fresh water.
All connections used in the filter are made on the original quick couplers, with additional protection with locking pins, thanks to which the probability of their disconnection is minimized. Linear inserts also have outputs adapted to work with quick couplers. When replacing the cartridges, it is not necessary to disassemble the connectors, but only to unplug them.
– in marine aquariums
– in freshwater aquariums
– in the household
– in laboratories and industry
The set includes:
– WPL2 pre-sediment
filter – WWL2 carbon pre-filter
– Reverse osmosis module (with a high-quality membrane with a daily capacity of 75GPD)
– Flow limiter / Restrictor
– 2x filter mounting bracket
– Sewerage clamp
– Brass valve for water connection
– Hose for filter connection – 3m
– Key for unscrewing the RO membrane housing
There are no reviews yet.